This setup is for BMW E30 IX which is four wheel drive version.
Finally ready and available, BMW E30 race/rally front suspension arm kit. Complete kit with all nuts and bolt for assembly. Bolt on kit, you only need to weld two extra mounting threads to rear bracket, as DTM cars had. To xbrace you bolt special billet cromo fork. STD geometry. From shop you can find also bumpsteer kit for E36. All welded parts are made from Cromo 4130 except rear bracket from S355 steel
- Cromo front track controlarm with 16mm spherical on body side and 40/20mm spherical on wheel side, all cromo 4130. In-place adjuster for adjustment.
-Wheelside mounting with cromo pin with nylock nuts
-Cromo tension arm with "stiff-joint" on TCA side, on body side M18x1.5 rosejoint. In-place adjuster for adjustment.
-Rear bracket has been drawn on CAD and lasercut from S355 steel Fits straight to original brackets, but you should weld extra mounting threads on to body like the DTM cars had, thread bungs comes with the kit
-To xbrace side bolt on billet mounting chromoly
-You can shim the rear mounting up-down, so you can play with antidive
-To all rosejoints you will get reducers down to 12mm bolt -To all joints mounting hardware with the kit, 10.9 grade M12x1.5 thread screws with nylock nuts -
TCA/Tension arm/rear bracket powdercoated.
Production sertificate for MOT inspection on request
