Balljoint pin E30-E36-E46 +25mm (Not E46 M3)

Description

This is especially designed for BMW E30-E36-E46 (not E46 M3) for the construction of the lower ball joint for track use (not for street use!). NOTE: THE CONE IS LOOSE ON THE PIN MAKING EVERYTHING TIGHTEN AGAINST THE SHOULDER AXLE.

This pin goes directly into a 20mm joint.

• material 25cromo4
• 20mm pin thickness
• special length for track use, +25mm, includes basket
• 14×1.5mm lock nut at the top end (thread approx. 20mm long)
• lower end locking nut thread M16x1.5

This set comes with nylock lock nuts and a sleeve that goes under the ball joint.

This applies to at least the following lower ball joints (the list will be increased when testing)

• BMW E30
• BMW E36
• BMW E46 (not suitable for E46 M3)

SOLD BY THE PIECE! PRICE INCLUDES ONE PIN, CONICAL SUPPORT, BOTTOM BUSH AND NUTS