Skip to main content

BMW E8x/E9x bumpsteer joint

270,00  / sarja (alv 25.5%)

SKU: 1BM8x9x1201 Category:

Description

E8x/E9x is very difficult to make a rallycar due FIA regulations insist a lot smaller wheel than to what the knuckles are designed to have in STD. When using 15″ wheel you need this kit + TCA kit from us. But even then you have to modify the knuckle, expecially if you use M-version of knuckle as this car had.

Bumpsteer mean toe change when tire moves in suspension up and down. On streetcars you usually can measure 20-40mm of toe change in full stroke. In racing you usually want to minimize the change. Without bumpsteer tierodjoints is very difficult.

– 14mm cromo spherical bearing or rosejoint depending of product
– 14mm 25cromo4 CNC machined pin
– nylock locknuts
– two universal shim bushes for adjusting the bumpsteer after you have measured it
– bottom locknut thread M14x1.5
– joint body with correct mounting thread to tierod
– price includes two joints

Check tierodjoint assembly instructions from your car manufacturer. Here is the pin mounting instruction:
https://uniball.fi/wp-content/uploads/2024/10/Bumpsteer-pin-installation-instruction.pdf

Fits atleast:
BMW E8x
BMW E9x

There are no reviews yet.

Be the first to review “BMW E8x/E9x bumpsteer joint”