Description
This is for Porsche 944 early versions which have steel TCA and ARB is clamp mounted, look at photos
All welded parts are 25cromo4. All welds done with TIG with proper filler wire. Finally powder coated. Certificate of manufacture on request.
– front tension arms 35x2mm tube, on the body side M16x1.5 CroMo uniball and double thread adjuster, on the TCA side “fixed” joint machined 25cromo4, inplace adjustable.
– between the lower support arm and the tension arm bracke a support rod to prevent the bracket bending
– billet aluminium brackets for the tension arms
– TCA 35×2.0mm tube, body side M16x1.5 RH CroMo uniball, wheel side mounting pin for the knuckle and CrMo 40/20mm spherical bearing. Mounting point for standard anti-roll bar
– 10.9 12×1.5mm bolt and locknut
– flat lock nuts included for all joints
Included in the package:
2pcs tension arms
2pcs TCA
Screws and nuts for tension arm to TCA mounting
2pc pins for mounting on the knuckle 25cromo4, including lock nuts and adapter bush
2 pcs 40/20mm CrMo spherical bearings and cirklips installed
reducers for bodymounts
2pcs billet mounting brackets for tension arms
2pcs support rods
black powdercoating
NOT included
– Rubber boots, ARB parts
Fits:
Porsche 924 and early 944 versions which have steel TCA and ARB is clamp mounted, look at photos
Porsche
924 2.0 1975-11 – 1989-08
924 2.0 Carrera GT 1980-06 – 1986-10
924 2.0 Turbo 1978-11 – 1980-06
924 2.0 Turbo 1980-06 – 1986-10
924 2.5 S 1985-09 – 1987-07
924 2.5 S 1987-08 – 1988-07
944 2.5 1981-06 – 1987-07
VW
Golf Mk1
Caddy Mk1
Jetta Mk1
Scirocco Mk1
There are no reviews yet.