Tensionbar steeljoint

Originally made for Fiat 131 Abarth g.4 early version of the tension arm mounting to track control arm. The original rubbers were displaced with this steel setup. Can be used in other cars too.

Male bigger “ball” measures are; 

• OD 35mm
• ID18mm
• max height 14mm
• straight are 7mm

The smaller part going over the bigger “ball” measures ovat;

• OD 32mm
• height 9mm
• ID 14mm

Both parts together height is 20.6mm. Original setup reaction bar has 14mm OD. You will need two pairs of these for one tension arm mounting. You may even use this in antirollbar to track control arm setup if the movement isnt very large, like circuit cars.