BMW E30 IX 4WD PRO+ arms kit

This kit is for the BMW E30 IX, a four-wheel drive model.

The set fits directly onto the standard fittings. However, there is an additional DTM-style mount added to the rear bracket, so it needs welding the two threaded threadbungs that come with the kit to the body. A billet fork is bolted to the front beam to which the uniball joint is attached. Standard geometry, nothing changes except the strength which is very good due to the aircraft grade Cromo tubing used.

The package includes:
– Cromo front support arm with 16mm uniball joint on the body side and 20/40mm uniball joint on the wheel side, all 25CroMo4. On the spot adjustment, you open the two lock nuts and just rotate the adjustment.
– For wheel side mounting, cromo cone pin and nuts
– Cromo reaction rod with cromo “fixed” joint at the support arm joint and M18x1.5 cromo uniball joint at the rear end. To adjust in place, you open the two lock nuts and just rotate the adjustment.
– Rear bracket in S355 steel, the bracket goes directly on the original mount but also has an additional mount on the side to be welded, like on DTM cars
– Billet bracket cromo to subframe
– Rear bracket can be shimmed in height, so antidive adjustment is possible
– Uniball joints for the engine mount and rear bracket come with reducers for 12mm bolts
– All joints 10.9 quality bolt M12x1.5 and nylock nuts
– Support arm/reaction rod/rear bracket powder coated, others electro galvanized

On request, a certificate of manufacture for roadworthiness testing

Suitability:

BMW E30ix (four-wheel drive)