Description
Adjustable rear tie rod set for Toyota MR2 ZZW30 to minimize bumpsteer.
Designed for the Toyota MR2 ZZW30 chassis, this rear tie rod set minimizes rear bumpsteer (toe changes during suspension travel) and provides precise alignment control for racing and track applications. The set includes 14 mm 4130 CroMo CNC-machined taper pins, 14 mm 4130 CroMo spherical rod ends, shim bushings for bumpsteer adjustment, and nylock locknuts.
Features:
- Rod End: 14 mm 4130 CroMo (25CrMo4) spherical rod end.
- Taper Pin: 14 mm 4130 CroMo CNC-machined taper pin (bottom thread M14x1.5).
- Adjustability: Includes two shim bushings for bumpsteer adjustment (trim to required size after measurement).
- Construction: Tie rod bodies designed for ZZW30 rear geometry.
- Applications: Toyota MR2 ZZW30 rear suspension, motorsport and track use.
Technical Specifications:
- Rod End: 14 mm 4130 CroMo spherical bearing
- Taper Pin: 14 mm CNC-machined 4130 CroMo
- Bottom Thread: M14x1.5
- Quantity: Sold as a pair (2 tie rods included)
Package Includes:
- 2 pcs tie rods
- 2 pcs 14 mm 4130 CroMo spherical rod ends
- 2 pcs 14 mm 4130 CroMo CNC taper pins
- 2 pcs shim bushings for bumpsteer adjustment
- Nylock locknuts
Installation guide: Taper pin installation instruction (PDF)
Toyota MR2 ZZW30 Rear Suspension Range:
| SKU | Product | Material / Construction | Joint / Thread | Mounting / Adjustment |
|---|---|---|---|---|
| 1TOMR23005 | Toyota MR2 ZZW30 Rear Tie Rods | 4130 CroMo / CNC Taper Pin | 14 mm 4130 CroMo rod end | Bumpsteer adjustable |
| 1TOMR23004 | Toyota MR2 ZZW30 Rear Trailing Arm | 4130 CroMo (25 x 2.0 mm) | M16x1.5 LH rod end / RH fork | In-situ adjustable |
| 1TOMR21019 | Toyota MR2 ZZW30 Rear Lower Control Arm | 4130 CroMo (25 x 2.0 mm) | M16x1.5 LH rod end / RH fork | In-situ adjustable |
| 2TOMR22001 | Toyota MR2 ZZW30 Rear Trailing Arm Hub Bushing | Press-fit steel housing | 14 mm 4130 CroMo spherical bearing | Press-fit to upright |
| 2TOMR22002 | Toyota MR2 ZZW30 Rear Control Arm Hub Bushing | Press-fit steel housing | 16 mm 4130 CroMo spherical bearing | Press-fit to upright |
There are no reviews yet.